kAWASAKI

To make sure you are viewing the latest version of this page,
please click your refresh button.

                           Click picture then
                           maximise window
                               to enlarge

Click to enlarge

Upper Fork Protectors

£35.99 per pair

Protects your upper fork tubes from roost
and crash damage

Click to enlarge

Top Upper Fork Protectors

£24.99 per pair

Protects your upper fork tubes from roost
and crash damage

Click to enlarge

Lower Fork Guards

£79.99 per pair

Much lighter and stiffer than stock.
Excellent with launch control systems

Click to enlarge

Bashplate - 4 stroke

£132.99

Ultimate 4 Stroke protection. Used by the GP teams. Lightweight and indestructible.

Includes our easy fit system, can be removed and refitted in less than a minute.

Top Photo - KX250F 2009-11

Bottom Photo - KX450F 2009-11

Click to enlarge

Frame Protection

£63.99 per pair

Protects the frame from unsightly wear from riders boots.
Very neat and hard wearing.

Click to enlarge

Tall Frame Protection

£89.99 per pair

Protects the frame from unsightly wear from riders boots.
Very neat and hard wearing.
Full height and coverage of the ali frame.

Click to enlarge

Front Disc Guard

£64.99

Stylish and rigid protection for your front brake disc.
Suitable for oversized discs.

Requires an Acerbis mounting kit (see below).

Click to enlarge

Front Disc Guard Fitting Kit

£23.50

For the guard above, replaces the left hand side front wheel spacer.

Click to enlarge

Tank Cover

£39.99

More total trick !!!
This is such a visual improvement over the look of the stock plastic tank. Our usual high quality and high gloss finish.

Click to enlarge

Exhaust Guard

125cc £69.99
250cc £79.99

Essential 2 stroke pipe protection.
We Guarantee ours not to burn, and look good for a long time to come.
Stainless Steel fitting kit included.

Click to enlarge

Exhaust Guard - 4 Stroke long

£64.99

Essential 4 stroke pipe protection.
Wrap around guards protect the front of the soft titanium pipes as well as stop the melting boots / trousers and burned leg.
Stainless Steel fitting kit included.

Click to enlarge

Bomb Guard

£39.99

If you have a bomb on your header pipe you know you burn your leg on it.
Our bomb guards are the solution at a fraction of the cost of melted race jeans and boots.
For HGS, DEP and FMF.

Fitting kit below required.

PHOTO COMING SOON

Click to enlarge

Bomb Guard fitting kit

£9.99

Fitting kit for above guards.
Removes the need for welding bosses on the pipe. The kit attaches to the pipe and the guard bolts to that.
Kit consists of: 2x Mounting brackets, 2x heat proof fibre washers, 2x bolts, 2xwashers, 2x jubilee clips.

Click to enlarge

Exhaust Guard - Aftermarket

cost of guard + £10

It is not possible to make a guard for every bike and every pipe available, but as we now have so many different guards, there is always something that will fit.

If you send us your aftermarket header pipe we will return it to you within just a few days with the guard fitted.

Click to enlarge

Front Sprocket Cover

£34.99

Much lighter and very neat replacement for stock. Covers pinch points to meet race regulations

Click to enlarge

Rear Chain Guide

£47.99

Much lighter than the stock item, most GP riders use them. Replacement for the metal guide utilising the stock rubber.

Click to enlarge

Hose Guide

£19.99

Keeps the front brake hose where it should be whilst forks are under compression.

Click to enlarge

Front Master Cylinder Protector

£19.99

Keeps the front brake hose where it should be whilst forks are under compression.

Click to enlarge

Rear Disc Guard

£39.99

Much lighter, stiffer and stronger than stock.
We supply these to GP teams and solved the bent disc problems they were having.

Click to enlarge

Carbon Fibre Pitboard

£79.99

Keeping your rider informed.
4.5mm Thickness, 660mm wide and weighing in at only 600g, there's nothing else like it on the market.

Expensive we know, but aren't all the nicest things in life!!! (oh, and very expensive to make).